SULAB Elevator Touch Button 863223H03 for Elevator Call Panel

Button Elevator Accessories Elevator Touch Button Elevator Button Elevator Touch Call Button  863223H03

Installation Steps
Removing the old button: Use a screwdriver to loosen the screws securing the button panel. Gently pull the panel open to reveal the internal structure. Locate the connector for the old button and carefully unplug it. If the connector is tight, use both hands to apply gentle pressure; do not pull it forcefully.
Installing the new button: Align the connector of the 863223H03 button with the connector on the circuit board. Gently insert it until it makes contact, ensuring the connector is secure and not loose. This button is designed for front-mounted installation and has a clip-on or screw-on mounting on the back. As needed, insert the button into the mounting hole and secure it from the back with the clip or screws. Reinstall the button panel and secure it with screws, applying moderate force.
Test Function: After confirming that all components are installed, power on the new button and press it to verify that it triggers the elevator's up/down commands.

Precautions
Static Electricity Protection: During disassembly and installation, keep your hands dry to prevent static electricity from damaging the circuit board. Wearing an anti-static wrist strap or touching a metal object is recommended to discharge static electricity.
Model Compatibility: When replacing buttons, ensure they are compatible with the original device. Using a different brand or model may cause incompatibility issues.
Professional Guidance: If you encounter difficulties during operation or are unsure of the specific steps, it is recommended that you contact a professional repair technician for assistance. Avoid blind attempts to avoid further safety hazards.